3D Printing Technology Deep Dive and Use Cases (Coursera)

3D Printing Technology Deep Dive and Use Cases (Coursera)

Welcome to “Introduction to 3D Printing Technology Deep Dive!” In this short course, you will learn about the working principles, applications, and limitations of various 3D printing technologies. After the course, you will be familiar with how to choose the right 3D printing technology to create proper prototypes.

Class Deals by MOOC List - Click here and see Coursera's Active Discounts, Deals, and Promo Codes.

Course 3 of 3 in the Rapid Prototyping Using 3D Printing Specialization.

What You Will Learn
Students will investigate the working principles, applications, and limitations of various 3D printing technologies.

Syllabus

WEEK 1
Course Introduction
Welcome to “Introduction to 3D Printing Technology Deep Dive!” In this short course, you will learn about the working principles, applications, and limitations of various 3D printing technologies. After the course, you will be familiar with how to choose the right 3D printing technology to create proper prototypes.

WEEK 2
3DP Metals and Composites
In this module, you will learn the technology principles, advantages, and disadvantages of metal and composite 3D printing technologies.

WEEK 3
3DP Ceramics and Electronics
In this module learners will be introduced to the 3D printing techniques of doing ceramics and electronics prototyping, as well as design for 3D printing principles.

WEEK 4
3DP Landscape
In this module learners will be introduced to the landscape of the 3D printing industry.

Go to Class
MOOC List is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Related Courses

Managing the New Product Development Process (Coursera) Coursera
University of Colorado Boulder

Managing the New Product Development Process (Coursera)

This course covers the product development process in detail. With the opportunity defined, learners begin with ideation techniques such as Design Thinking to create new product concepts. Learners define the tools to create product specifications that meet customer requirements, then conceptualize different ways of meeting those requirements. Learners conclude by exploring prototyping and the techniques used to down-select to a concept that is then carried through launch.

Nov 16th 2026
5-12 Weeks
Human-Centered Design for Inclusive Innovation (Coursera) Coursera
University of Toronto

Human-Centered Design for Inclusive Innovation (Coursera)

This course introduces the principles and practices of human-centered design (also sometimes called “design thinking”) which are essential for developing innovative and inclusive products, services, processes and policies. You will learn by doing, experiencing the design process through exercises and a mini-bootcamp. In this course, you will learn about and experience key human-centered design practices: empathize, reframe, ideate, prototype and test. You will learn why human-centered design is a central component of Gender Analytics. You will develop skills in problem finding (and not just problem solving) by understanding users', stakeholders’ and beneficiaries' lived experiences.

Nov 16th 2026
4 Weeks
UX (User Experience) Capstone (Coursera) Coursera
University of Michigan

UX (User Experience) Capstone (Coursera)

In this UX capstone course, you’ll conduct a multi-stage user experience project to design a product from scratch. You will employ interviews, inspection methods, and user testing, along with ideation, design, and prototyping methods to gain and communicate valuable insight that can be used to deliver a compelling product.

Nov 23rd 2026
5-12 Weeks
3D Printing Hardware (Coursera) Coursera
University of Illinois at Urbana-Champaign

3D Printing Hardware (Coursera)

This course will provide an in-depth exploration of desktop 3D printing hardware. It will examine the history of desktop 3D printing and demonstrate how 3D printers are made and how they work. This course will also provide step-by-step instructions for how to use and repair a 3D printer. It will also explore the different types of materials that can be 3D printed and will demonstrate how you can create various objects using these tools and materials.

Dec 7th 2026
5-12 Weeks
Establishing Product-Market Fit (Coursera) Coursera
University of Maryland, College Park

Establishing Product-Market Fit (Coursera)

Entrepreneur and investor Marc Andreessen coined the term product-market fit in 2007 when he said, “Product-market fit means being in a good market with a product that can satisfy that market.” While there are ample articles that mention the term, detailed guidance on how to actually achieve product-market fit is scarce.

Nov 16th 2026
4 Weeks
Prototyping and Design (Coursera) Coursera
University of Minnesota

Prototyping and Design (Coursera)

In this course you will learn how to design and prototype user interfaces to address the users and tasks identified in user research. Through a series of lectures and exercises, you will learn and practice paper- and other low-fidelity prototyping techniques; you will learn and apply principles from graphic design, including design patterns; you will learn to write a design rationale; and you will learn how to design for specific populations and situations, including principles and practices of accessible design.

Nov 16th 2026
4 Weeks
3D Printing Capstone Coursera
University of Illinois at Urbana-Champaign

3D Printing Capstone

The capstone will integrate the learning acquired from the four courses in the 3D Printing Specialization through a hands-on project. This project will enable you to turn an idea into an object using the knowledge and skills acquired through the other courses. Specifically, you will be guided through a step-by-step process in which you imagine, design, make, and share a 3D printed object. Thus, through this capstone, you will be able to put course concepts into action and utilize the skills that you have acquired throughout the Specialization.

Nov 23rd 2026
4 Weeks
User Experience & Interaction Design for AR/VR/MR/XR (Coursera) Coursera
University of Michigan

User Experience & Interaction Design for AR/VR/MR/XR (Coursera)

This second course in the XR for Everybody specialization looks at how to design new user experiences for XR technologies. The course provides learners with a design thinking mindset and equips them with a fundamental toolbox for creating XR applications using rapid prototyping. It starts with a broad overview of the complete XR design process, discussing different paths to becoming an XR creator, what is generally involved in making XR experiences, and how to best get started.

Nov 23rd 2026
4 Weeks
Using Rapid Prototyping in the Engineering Design Process (Coursera) Coursera
Arizona State University

Using Rapid Prototyping in the Engineering Design Process (Coursera)

Hello, everyone! Welcome to this course on Using Rapid Prototyping in the Engineering Design Process. This is part of the Rapid Prototyping and Tooling specialization. In this course, I’ll cover the engineering design process and how it can be used to solve open-ended problems. I’ll discuss the different stages of prototyping and why it is advantageous to produce prototypes rapidly. I’ll then discuss engineering drawings and how to communicate information about 3-dimensional objects on 2-dimensional mediums such as paper or a computer screen.

Nov 23rd 2026
4 Weeks
Human-Centered Design: an Introduction (Coursera) Coursera
University of California, San Diego

Human-Centered Design: an Introduction (Coursera)

In this course, you will learn how to design technologies that bring people joy, rather than frustration. You'll learn several techniques for rapidly prototyping and evaluating multiple interface alternatives -- and why rapid prototyping and comparative evaluation are essential to excellent interaction design. You'll learn how to conduct fieldwork with people to help you get design ideas. How to make paper prototypes and low-fidelity mock-ups that are interactive -- and how to use these designs to get feedback from other stakeholders like your teammates, clients, and users. Armed with these design-thinking strategies, you’ll be able to do more creative human-centered design in any domain.

Nov 16th 2026
4 Weeks